Since 1870 we’ve lived and breathed malting. With this passion and expertise, and by combining traditional and modern techniques, we create an impressive range of malted and non-malted products, including several unique and exclusive barley malts.
We have a wide range of malts suitable for brewing and distilling to provide you with the foundations for creating your next beer or whisky.
From our traditional floor maltings to our state-of-the-art packaging line, all of our malts are processed by a team of skilled maltsters. Find out more about our different processes here.
Our team of maltsters and brewers have put together a number of different technical materials, from recipes to blog posts on conditioning, to assist you in your brewery or distillery. Find out more here in this section.
There is nothing more we love than talking to brewers and distillers so if you have any questions, or would like to arrange a call with a member of our team, please feel free to get in touch – we would love to hear from you!
You can read my bio by clicking the button below
Smelling like the best bits of a green curry, after popping the can I took a sip. Waves of lime and coconut hit my tongue, followed by a clean aftertaste all tied up in a spritzy liquid at just 3.4%. Opaque and extremely pale in appearance, it had a memory of beer but also mojito and the fizzy, cloudy “Nigori” sake you get in Japan. What was this new alchemy?
We were attending the inaugural Brew LDN festival in February and were in the process of sampling Salt Beer Factory vs Two Downs Down Brewing’s Lime After Lime, Lime & Coconut Hard Seltzer. One of several of this new category pouring at the festival, it ticked a lot of boxes that drinkers are increasingly demanding; low ABV, light and refreshing, flavourful but not heavy, not bitter and fruit-driven.
While the hard seltzer craze has yet to properly hit UK shores, it’s been booming in the USA.
If you’ve not travelled to the USA, then you might not know that ‘hard’ is a placeholder for ‘alcoholic’. Hard cider has been around for a while, and in the past decade, there has been hard lemonade, ice tea and even root beer; all drinks designed to cater to drinkers who are continually exploring new flavours and experiences.
Seltzer itself has been around for a long time and is simply what we in the UK would call fizzy or carbonated water. The word derives from the town of Neiderseltser in Germany that was bottling natural spring water as far back as the 1780s.
In the past few years, Hard Seltzer has burst onto the drinks market, capitalising on digital marketing with brand videos going viral on college campuses in the USA. The low calorie, easy-drinking credentials that typify Hard Seltzer have chimed with a health-conscious, clean living demographic.
It’s undoubtedly true that fads come and go especially in the US market so is hard seltzer just another gimmick? It doesn’t look like it. Accordingly to the IWSR, “Within six years, hard sparkling waters, also known as hard seltzers, have grown to account for nearly half (43%) of all US mixed drinks”. According to another report, the category is forecast to grow to $3 to $4.5 billion over the next two to five years.
This forecast also chimes with the analysts at Neilsen who believe that the growing trends in 2020 will centre around “lifestyle-oriented drinks that tie into consumer interest in their active routines”, “Lower ABV and lower-calorie IPAs” and “Lower ABV ready-to-drink cocktails”.
If you thought this was all just happened on the other side of the pond, you’d be wrong. BrewDog has fast-tracked their Hard Seltzer project “Clean % Press”, Carlsberg also has one in the works too, and the US giant of Hard Seltzer, White Claw, will make its UK debut next month.
While there are considerable challenges in making a hard seltzer that looks and tastes like fizzy water, there are certainly opportunities to take some of the hallmarks and incorporate into your beer NDP workstream, I think, given the increased opportunities in the off-trade in the UK due to the coronavirus pandemic.
With summer just around the corner, it’s a great time to innovate utilising the plant you already have.
I zoom’d with our friend Colin Stronge, Head Brewer from Salt Beer Factory, to ask about his Hard Seltzer project.
Colin S: “It started as an idea for a collaboration brew with Brick Brewery. We were chatting about what to do and thought we’d have a look at the DIPA/Impy Stout/DDH route. Pete, the head brewer there, mentioned he’d been toying with doing something from a style [hard seltzer] that we didn’t think had been attempted in the UK yet and we riffed on the idea from there.
It’s hard to say. I was a little reserved about the idea. It seems the trend [in craft] seems to be for beers with big body and sweetness, but the more I thought about it the more the idea appealed. We’ve done two different takes on the style and although they have been slow burners the feedback has been overwhelmingly positive. In the warmer summer months I could see them getting a lot of traction.
For us the most important thing was that it could still be classified as a beer, so had to have water, hops, malt and yeast. We used low colour pale as the main base, with a good dose of torrified wheat to keep the colour low but give good extract. We added about 20g of hops in the kettle but some noble hops for very low flavour impact and then about 50% of the sugars came from Dextrose and fruit juice. We then lagered it for 4 weeks to help with clarity and to make sure that the yeast profile was near non-existent.
Haha, yeah that’s pretty much what we were going for [minus the chilli]
As much as I love that stuff, it’s probably best staying in the curry and not in the beer!
Exactly why I insisted on using beer ingredients, we didn’t want to find ourselves with a HMRC problem! We ensured that the seltzer very much followed the brewing process and it does go through all the usual stages of a brew; mash, boil, ferment. It also contains malt, hops and yeast.
Keeping the beer flavours neutral whilst still remaining a beer, in essence. A very light hand was required!
The original collaboration with Brick [made with fresh watermelon, strawberry juice and mint] sold out. Our second, the coconut and lime brewed in collaboration with 2 Towns Down brewing, is still available. We’re just at the planning stage for another iteration but that’s under wraps just now.
As Colin explained, it’s essential to stay in the beer category. For a UK small brewer with full (50%) duty relief, you would pay 12.6p on a 4% beer in a 330ml can. If you drift into the made wine category, then the same drink and pack size would cost you 30p in duty! So malt is key!
I’m going to look at two routes for brewing the style; one to get as close to fizzy water as possible and the other a bit closer to beer.
The key to the drink is to get it as pale as possible. Malt is key to ensuring it is still a beer and for providing enzymes and FAN for a decent fermentation. The palest of ale malt is a good fit for a neutral flavour.
To avoid any potential polyphenol related astringency or haze issues you might consider something like Crisp’s Extra Pale Clear Choice malt which is polyphenol free. Salt chose to add torrefied wheat for head retention.
One Scottish brewer, I spoke to added flaked torrefied maize and rice which are extremely pale (just 0.4 IOB as compared to torrefied wheat at 4.6 IOB in colour), low in protein and gluten-free, if you’re looking to make the clearer version. For maximum fermentability, we would recommend a mash at 62-63 degrees C (143-145 F) for one hour with a standard sparge.
Additional fermentables can also be added to the boil in the form of sugar or syrups. Just remember to account for these in your ABV calculations. (see our recipe below).
A 15-minute boil is all that’s required with the lightest of hop additions. The aim here is to sterilise the wort but avoid any colour pickup.
If you’re adding heavy doses of sugar, then a healthy fermentation would be achieved with the addition of yeast nutrition. Sugar has no nutrition of its own, and a deficit of FAN will cause the fermentation to be sluggish and potentially produce off flavours and unpleasant volatiles. For yeast, consult with your supplier to provide a neutral strain. Something like a champagne yeast could work well too, but if you wanted to accentuate fruit flavours, then the new kveik yeast could also be an interesting path to take.
In fermentation, you’re looking for pretty much dryness (1.000 SG or below), so the addition of amyloglucosidase during fermentation is almost certainly required to achieve this – just like brewing a brut IPA. Alternatively, instead of boiling, you could pasteurise your wort to kill off any bacteria or wild yeasts below the denaturation temperature of beta-amylase (75C), which should result in a fermentation to dryness.
It’s at this stage that the two styles part ways. To achieve a crystal clear liquid, you will need to filter the beer. Carbon filtration will help remove colour and yeast-derived flavours. Yeast volatile flavours can be driven off in the CT by bubbling through a carbonation stone with CO2 and venting the tank.
If you’re not going for the crystal clear look, move your ferment off the yeast into a CT and make your post-fermentation additions. Without the addition of hops and speciality malts, the beer needs flavour additions. Familiar cocktail flavours of summer fruits, mint, citrus, tropical fruits and stone fruits can all be used. There are several suppliers of natural fruit flavours, and they can guide how best to use these—citric and malic acid (for flavour adjustment) Potassium sorbate (for stabilisation).
If you’ve not sterile filtered the liquid or pasteurised, you’ll want to avoid additions that add their own sugars in case any residual yeast acts upon them and increases carbonation. Some drinks are sweetened with sugar which does add calories. Low calories certainly typify the style, and it very much depends on what you’re aiming for. The US versions are targeting around 92 Kcal per 330ml (100 Kcal in 12oz). If you consider that at 4% ABV there are 73 calories just from the alcohol, it doesn’t give you a considerable amount of room to play with to hit 90-95 calories total.
For reference, a standard 4.5% IPA in a 330ml can would be around 125 calories.
There is a handy list on the web of all the major USA brands, their flavours, calories and sugar content.
With no sign of the lockdown easing for the hospitality trade, and hopefully with some summer sun around the corner, why not try your hand at making a refreshing hard seltzer for those back garden (self-isolated) BBQs.
The drink that inspired this piece.
“A light-bodied, thirst-quenching and refreshing malted beverage. Kazbek hops complements a light malt base in the whirlpool. Toasted coconut, coconut paste and lime zest are added post-fermentation for fresh and zesty flavours. This is not beer as you know it!”
3.5% ABV, 0 IBUs
While not technically a hard Seltzer, just 6 IBUs and is fermented dry to achieve the same effect. After all, when did a category definition ever restrict innovation?!
According to Chris at the brewery, “Che Guava is the Low man on the Totem Pole. It’s a gluten free lager that delivers a totally tropical explosion of guava gratification on your tongue.
With aromas of tropical fruit, citrus & champagne, this brut-style guava lager finishes dry but yet is still very refreshing.
3.5% ABV, 1027 OG, 0 PG, 6 IBU; gluten-free. Che contains a limited edition flaked buckwheat that we produced for the brewery. We have a very small amount remaining so if you’re interested in this product, get in touch.
“We genuinely had no clue what hard seltzer was supposed to taste like, so we brewed one with fresh white guava and infused pinot noir skins from our friends Renegade Urban Winery. We pitched a champagne yeast and crossed our fingers that it fermented in time!
Fizzy fermented beverage waft of ripe guava, has a light fruity body and a dry finish with a touch of tannin.”
© 2023 Crisp Malt
Made by Farrows